TPO & EPDM Roofing

TPO & EPDM Roofing in Lakeville, MN

Commercial Roofing Contractor for TPO and EPDM Flat Roofing Systems

Good to Go Construction has installed TPO and EPDM roofing systems for homeowners and commercial property owners across Lakeville, MN since 1996.

Why Flat Roofing Needs TPO or EPDM Roofing Materials

Flat roofs need a different approach than a pitched shingle roof, since the membrane itself has to do all the work of keeping water out, and choosing the right one matters as much as the installation. Flat and low-slope roofs, common on additions, garages, porches, and commercial buildings throughout Lakeville, Apple Valley, and Burnsville, don’t have the slope advantage that sheds water on their own.

TPO roofing and EPDM roofing are the two most reliable single-ply systems for this job. TPO is a reflective, heat-welded membrane that resists UV exposure and holds up well against Minnesota’s summer sun. EPDM is a synthetic rubber membrane known for flexing with temperature swings without cracking, which matters through our freeze-thaw winters.

Homeowners and property owners typically call us for TPO or EPDM roofing when they notice ponding water on a flat section, aging or cracking membrane seams, interior stains below a flat roof area, or when a commercial roof repair has become a recurring expense instead of a one-time fix.

Signs Your Flat Roof Needs TPO or EPDM Roofing Attention

Flat roofing problems often stay hidden until water finds its way inside. Catching the warning signs early can turn a small repair into the difference between a patch job and a full membrane replacement.

Standing water that doesn't drain within 48 hours after rain

Seams that look lifted, cracked, or separated at the edges

Bubbling, blistering, or wrinkling across the membrane surface

Interior ceiling stains or musty odors below a flat roof section

Visible wear around vents, drains, or rooftop equipment

A membrane older than 15 to 20 years with no recent commercial roof repairs

If you're seeing any of these signs on a home addition, garage, or commercial building, it's worth scheduling a roof inspection before the next Minnesota winter puts more stress on the system.

Our TPO and EPDM Roofing Installation Process

Flat roofing is a precision job. A single poorly welded seam or missed flashing detail can undermine the entire membrane, so we follow a consistent process on every TPO and EPDM roofing project.

1
Roof Inspection and Consultation
We evaluate the existing structure, checking drainage paths, substrate condition, and insulation needs before recommending TPO or EPDM roofing for your specific building.
2
Substrate Preparation
The roof deck and existing insulation are prepared to support proper adhesion or mechanical fastening, giving the new membrane a stable, even base.
3
Membrane Installation and Seaming
TPO membranes are heat-welded at every seam, while EPDM sheets are sealed with proper adhesives, creating one continuous barrier against moisture.
4
Detail Work and Final Inspection
We finish flashing, edges, and penetrations, then walk the completed roof to confirm drainage, seam integrity, and overall workmanship before calling the job done.

Why Lakeville Property Owners Choose Our Roofing Company

Flat roofing rewards experience. As a family-owned roofing contractor, Good to Go Construction has spent nearly three decades learning how TPO and EPDM roofing systems perform through Minnesota winters, spring melt, and summer heat.

Frequently Asked Questions About TPO and EPDM Roofing

Here are some of the questions we hear most often from Lakeville homeowners and property owners considering TPO or EPDM roofing.

What's the difference between TPO roofing and EPDM roofing?

How long do TPO and EPDM roofing systems last?

Can TPO or EPDM roofing be installed on a residential home?

Do TPO and EPDM roofs need regular maintenance?

Our Services

Explore More Roofing, Gutter, and Exterior Services

TPO and EPDM roofing solve flat roof problems, but Good to Go Construction handles the full range of exterior needs for homes and buildings across Lakeville, Farmington, Rosemount, and the surrounding south metro.

Get a Quote on TPO or EPDM Roofing for Your Property

Whether you’re dealing with ponding water on a flat roof or planning ahead for a commercial roof replacement, our team can walk your property and recommend the right membrane for your building. Reach out to Good to Go Construction and get a clear, honest assessment of your TPO or EPDM roofing needs.

A family-owned roofing contractor and gutter company committed to doing the job right the first time. We've served homeowners throughout Lakeville, MN and the surrounding metro since 1996.

Get In Touch
  • Mon - Sat: 9 AM - 5 PM
    Sun: Closed
© 2026 Good To Go Construction | All rights reserved.